Manitowoc I0320 Especificaciones descargar pdf (Pagina 136)

136 Part Number STH025 2/14

Water System Checklist

A water-related problem often causes the same

symptoms as a refrigeration system component

malfunction.

Water system problems must be identified and

eliminated prior to replacing refrigeration components.

Water area (evaporator) is dirty

• Clean as needed

Water inlet pressure not between 20 and 80 psig

(1-5 Bar, 138-552 kPa).

• Install water regulator or increase water pressure

Incoming water temperature is not between 35°F

(2°C) and 90°F (32°C)

• If too hot, check the hot water line check valves in

other store equipment

Water filtration is plugged (if used)

• Install a new water filter

Water dump valve leaking during the Freeze cycle

• Clean/replace dump valve as needed

Vent tube is not installed on water outlet drain

• See Installation Instructions

Hoses, fittings, etc., are leaking water

• Repair/replace as needed

Water fill valve is stuck open or closed

• Clean/replace as needed

Water is leaking out of the sump trough area

• Stop the water loss

Uneven water flow across the evaporator

• Clean the ice machine

Plastic extrusions and gaskets are not secured to

the evaporator

• Remount/replace as needed

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 271 272

Sin comentarios

Manitowoc I0320 Especificaciones Pagina 136