Manitowoc QF0800 Especificaciones descargar pdf (Pagina 51)

Part Number 80-1230-9 6/08 51

Sanitizing Procedure

Ice machine sanitizer is used to remove algae or

slime. It is not used to remove lime scale or other

mineral deposits. Refer to the “Cleaning Procedure”

for removal of lime scale or other mineral deposits.

NOTE: Sanitizing must be performed on adjacent

surface areas not contacted by the water distribution

system. Always perform Disassembly for Cleaning and

Sanitizing Procedure and a Cleaning Procedure

before sanitizing the ice machine.

Step 1 Turn off the water supply to the ice machine.

Step 2 Place ICE/OFF/CLEAN toggle switch in the

CLEAN position. The dump valve will open and drain

the water from the evaporator and reservoir.

Step 3 Wait approximately 30 seconds (or until the

evaporator is drained) and place the toggle switch in

the OFF position.

Step 4 Refer to chart and premix the correct solution

of sanitizer and cool water for your model ice machine.

Step 5 Remove the top cover from the ice chute and

pour the sanitizer/water solution into the evaporator.

Add the entire amount of premixed solution (excess

solution will exit through the overflow tube in the water

reservoir).

Step 6 Replace the ice chute cover and allow the ice

machine to stand for 30 minutes.

Step 7 Turn on the water supply to the ice machine.

Model

Amount of Sanitizer

Part Number

94-0565-3

Amount of Water

SN12

SN20

2 ounces (60 ml) 3 gallons (11.4L)

SF0400

SN0450

SF0600

SN0650

SF0900

SN0950

SF1200

SN1250

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 307 308

Comentarios a estos manuales

Sin comentarios

Manitowoc QF0800 Especificaciones Pagina 51

Comentarios a estos manuales

Relacionado con productos y manuales para Máquinas productoras de hielo Manitowoc QF0800