Manitowoc QF0800 Especificaciones descargar pdf (Pagina 42)

42 Part Number 80-1230-9 6/08

MANITOWOC’S CLEANING TECHNOLOGY

Manitowoc Flake/Nugget Ice Machines include

technology that allows the initiation and completion of

a cleaning cycle at the flip of a switch. This cycle will

permit cleaning of all surfaces that come in contact

with the water distribution system. Periodic

maintenance must be performed that includes

sanitizing the bin and adjacent surface areas, which

are not contacted by the water distribution system.

Depending on local water conditions Manitowoc

recommends initiating preventative maintenance

cleaning procedures between the 6 month cleanings.

This preventive maintenance removes mineral build-

up from the evaporator, which results in peak

efficiency and lower operating costs.

This technology allows initiation and completion of a

clean cycle, after which the ice machine automatically

starts ice making again.

This Manitowoc Ice Machine has three separate

cleaning procedures.

Preventative Maintenance Cleaning Procedure

Perform this procedure as required for your water

conditions. Recommended monthly.

• Allows cleaning the ice machine without removing

all of the ice from the bin

• Removes mineral deposits from areas or surfaces

that are in direct contact with water during the

freeze cycle (reservoir, evaporator, auger, drain

lines).

Cleaning/Sanitizing Procedure

This procedure must be performed a minimum of once

every six months.

• All ice must be removed from the bin

• The ice machine and bin must be disassembled

cleaned and sanitized

• The ice machine produces ice with the cleaner and

sanitizer solutions

• All ice produced during the cleaning and sanitizing

procedures must be discarded

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 307 308

Sin comentarios

Manitowoc QF0800 Especificaciones Pagina 42