Manitowoc QF0800 Especificaciones Pagina 239
- Pagina / 308
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Part Number 80-1230-9 6/08 239
EVAPORATOR REASSEMBLY
NOTE: Upper bearing has dust seal. Bottom bearing does
not have dust seal. Bearing seating tool and grease are
included with kit.
1. Grease top shaft seal and install on auger.
2. Imprinted text on bearing must face up. Install top
bearing, press on both inner/outer bearing race with
special tool to seat.
3. Install run-on sleeve onto bottom of auger (taper must
face seal).
4. Grease top and bottom bearing race.
5. Install auger into barrel from top down.
6. Install inner and outer snap rings at top bearing.
7. Seat upper bearing, use dead blow hammer to drive
auger up and seat upper bearing on snap rings.
8. Install water seal use special tool to apply even
pressure.
9. Install water seal snap ring use special tool to compress
seal and seat snap ring.
10. Bottom bearing assembly (QF2300 Only - one bearing
shim must be installed before bearing.) Roller thrust
bearing is directional. Imprinted text on bearing race
must face down, towards bottom of evaporator. The
wider of the two races must face up, towards the
evaporator.
11. Hand-pack bearing in grease and drive in place with
special tool.
12. Install snap ring in bottom. (QF2300 Only - before
installing snap ring, install bearing backup spring.)
13. Pack top cover with grease and install.
14. Install bottom seal. Work any air out from under the seal
being careful not to cut the seal or score the shaft.
15. Hand-turn auger to check operation. You can see the
first shoulder of the auger, when it is correctly installed.
16. Install key stock.
17. Install splined hub. (Must be flush with shaft.)
18. Evacuate and recharge.
19. Torque foundation bolts to 195-205 inch lbs.
20. Reassembly components removed in Step 2 of Remove
Evaporator.
21. Reconnect power and water supply.
22. Test run ice machine.
- Technician’s 1
- Handbook 1
- Safety Notices 3
- Procedural Notices 3
- ! Warning 4
- Table of Contents 5
- 6 Part Number 80-1230-9 6/08 6
- Part Number 80-1230-9 6/08 7 7
- 8 Part Number 80-1230-9 6/08 8
- General Information 9
- S N 0658 A 10
- Important 11
- 12 Part Number 80-1230-9 6/08 12
- Part Number 80-1230-9 6/08 13 13
- 14 Part Number 80-1230-9 6/08 14
- Ice Machine 14
- Twelve months from the 14
- Part Number 80-1230-9 6/08 15 15
- 16 Part Number 80-1230-9 6/08 16
- Part Number 80-1230-9 6/08 17 17
- 18 Part Number 80-1230-9 6/08 18
- Installation 19
- SN12/SN20 20
- BTU/Hour 21
- Part Number 80-1230-9 6/08 23 23
- 28 Part Number 80-1230-9 6/08 28
- Part Number 80-1230-9 6/08 29 29
- LINE SET REQUIREMENTS 30
- Traditional Remote Units Only 30
- 32 Part Number 80-1230-9 6/08 32
- Component Identification 33
- Remote & QuietQube Models 34
- QF800/QC700 35
- 36 Part Number 80-1230-9 6/08 36
- Maintenance 37
- 38 Part Number 80-1230-9 6/08 38
- Part Number 80-1230-9 6/08 39 39
- 40 Part Number 80-1230-9 6/08 40
- Part Number 80-1230-9 6/08 41 41
- 42 Part Number 80-1230-9 6/08 42
- Part Number 80-1230-9 6/08 43 43
- Part Number 80-1230-9 6/08 45 45
- 46 Part Number 80-1230-9 6/08 46
- Part Number 80-1230-9 6/08 49 49
- 52 Part Number 80-1230-9 6/08 52
- Part Number 80-1230-9 6/08 53 53
- 54 Part Number 80-1230-9 6/08 54
- 5. Lift out ice damper 55
- 56 Part Number 80-1230-9 6/08 56
- Part Number 80-1230-9 6/08 57 57
- 58 Part Number 80-1230-9 6/08 58
- 60 Part Number 80-1230-9 6/08 60
- Part Number 80-1230-9 6/08 61 61
- 6. Remove front cover 62
- A. Lift up on front cover 62
- 7. Remove side panels 62
- 8. Remove ice chute cover 63
- B. Lift to remove cover 63
- 9. Lift out ice damper 64
- Part Number 80-1230-9 6/08 65 65
- 66 Part Number 80-1230-9 6/08 66
- Part Number 80-1230-9 6/08 67 67
- 68 Part Number 80-1230-9 6/08 68
- Part Number 80-1230-9 6/08 69 69
- 70 Part Number 80-1230-9 6/08 70
- Part Number 80-1230-9 6/08 71 71
- 18. Remove ice deflector 72
- Part Number 80-1230-9 6/08 73 73
- 74 Part Number 80-1230-9 6/08 74
- Part Number 80-1230-9 6/08 75 75
- 76 Part Number 80-1230-9 6/08 76
- 78 Part Number 80-1230-9 6/08 78
- Model Amount of Cleaner 78
- QF0400 2 oz. (60 ml) 78
- Part Number 80-1230-9 6/08 79 79
- 80 Part Number 80-1230-9 6/08 80
- Part Number 80-1230-9 6/08 81 81
- Part Number 80-1230-9 6/08 83 83
- 86 Part Number 80-1230-9 6/08 86
- Part Number 80-1230-9 6/08 87 87
- 88 Part Number 80-1230-9 6/08 88
- Part Number 80-1230-9 6/08 89 89
- 90 Part Number 80-1230-9 6/08 90
- Part Number 80-1230-9 6/08 91 91
- 94 Part Number 80-1230-9 6/08 94
- Part Number 80-1230-9 6/08 95 95
- 98 Part Number 80-1230-9 6/08 98
- Part Number 80-1230-9 6/08 99 99
- WATER LEVEL 102
- FLOAT VALVE 105
- Water Reservoir Removal 106
- Dump Valve Disassembly 110
- Door Removal 111
- Operation 115
- ENERGIZED PARTS 118
- Energized Parts 125
- Energized Parts (Continued) 126
- Troubleshooting 133
- Ice Machine Will Not Run 134
- Replace HES #2 135
- IMPORTANT 136
- Machine Will Start 136
- OPERATIONAL PROBLEM CHECKLIST 141
- (disch temp, water level or 148
- No Water Checklist 151
- Gear Motor Speed Checklist 153
- Temperature Sensor Checklist 156
- QF0400/QC0700/QF0800 156
- Component Check Procedures 167
- Step 3 Check for Continuity 168
- Reading Result 168
- Open Replace the switch 168
- Continuity Cause 172
- No Replace bin level probe 172
- Yes Go to step 3 172
- DISCONNECT BIN LEVEL PROBE 174
- FROM CONTROL BOARD 174
- DISCONNECT 178
- WATER LEVEL PROBE 178
- PROBE LIGHT 178
- Depressed Closed 186
- Released Open 186
- Speed Sensor 189
- HPR SOLENOID 195
- HPR VALVE 196
- Cooling Mode 211
- Cut-Out at Setpoint 211
- Contamination Cleanup Chart 223
- USING PINCH-OFF TOOL 228
- Evaporator Re-Build Kits 235
- CONTENTS OF THE RE-BUILD KIT: 236
- SPLINE HUB AND KEY STOCK 237
- EVAPORATOR REASSEMBLY 239
- Component Specifications 247
- Refrigerant Pressure Charts 251
- SN012A/SN020A 252
- SELF-CONTAINED AIR-COOLED 252
- QF0400A BRONZE EVAPORATOR 254
- SELF-CONTAINED WATER-COOLED 256
- Condenser Water Consumption 256
- QUIETQUBE REMOTE AIR-COOLED 261
- REMOTE AIR-COOLED 264
- SF900C/RFC985 271
- 24-HOUR ICE PRODUCTION 272
- SN950C/RFC985 274
- SF1200C/RFC1285 277
- SN1250C/RFC1285 280
- QF2200/RFC2085 281
- QF2300/RFC2385 282
- Diagrams 283
- 115/60/1 – 230/50/1 285
- QF0400 115/60/1 – 230/50/1 286
- 115/60/1 – 230/50/1 289
- QF2200 115/60/1 – 230/50/1 290
- RFC2385 CONDENSING UNIT 294
- 230/60/1 – 230/50/1 294
- 208 - 230/60/3 295
- SN012/SN020 299
- SF0400/SN0450/SF0600/SN0650 300
- SF0900/SN0950/SF1200/SN1250 301
- Air Cooled 301
- SF0600/SN0650 302
- Remote Air Cooled 302
- Air & Water Cooled 303
Relacionado con productos y manuales para Máquinas productoras de hielo Manitowoc QF0800
(272 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.072 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales