Manitowoc Q130 Especificaciones descargar pdf (Pagina 198)

198 Part Number 80-01111-9 7/10

4. Apply heat to copper tubing first and move flame

toward valve socket.

A. Heat copper tubing for approximately 10 to

15 seconds then direct the heat to the

solenoid socket.

B. Heat the solenoid socket for 2 to 5 seconds

and apply silver solder to joint.

C. Do not attempt to fill solenoid flange with

solder. Solder will draw into socket.

5. Install new liquid line drier.

6. Leak check joints by pressurizing system with

150 psig nitrogen.

7. Evacuate and re-charge system to nameplate

charge.

8. Reinstall coil (using a twisting motion) and attach

wiring.

SV3071

MAX. 1300°F

(700°C)

SV3073

1 2 ... 193 194 195 196 197 198 199 200 201 202 203 ... 235 236

Sin comentarios

Manitowoc Q130 Especificaciones Pagina 198