Manitowoc Q130 Especificaciones descargar pdf (Pagina 196)

196 Part Number 80-01111-9 7/10

Q270 Condenser Fan Motor Replacement

Access to remove, clean or replace the condenser fan/

motor can be obtained by performing the following:

1. Disconnect electrical power to the ice machine at

the electrical service disconnect.

2. Remove the screws that secure the condenser to

the cabinet and the base to the cabinet.

3. Slide the base forward until contact is made with

the stop screw (approximately 2.5" [6.3 cm]).

4. Remove right hand screw securing condenser to

base.

5. Pivot condenser forward to obtain 5" (12.7 cm)

between the cabinet and condenser shroud. Take

care not to kink refrigeration tubing.

Accessing the Condenser Fan Motor

Caution

Do not move base p ast the st op scre w, t ubing

damage could result.

REMOVE THREE

SCREWS AND

PULL BASE

FORWARD TO

STOP SCREW.

2.5" (6.3 CM) TO

STOP SCREW

REMOVE SCREW AND

PIVOT CONDENSER TO

OBTAIN 5" (12.7 CM)

CLEARANCE BETWEEN

CABINET AND

CONDENSER SHROUD.

5" (12.7 CM)

CLEARANCE

AFTER

PIVOTING

CONDENSER

PT1295A

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 235 236

Sin comentarios

Manitowoc Q130 Especificaciones Pagina 196