Manitowoc Q290 Especificaciones

Q MODEL DISPENSER Q160/290/300 Installation, Use, and Care Thank you for selecting a Manitowoc Dispenser, the dependability leader in i

General Information Section 1Room Key Card Activation 1. User places ice bucket under ice chute. 2. User places their hotel room key card into a

1-5 Section 1 General InformationAdjusting the Coin Mechanism Timer1. Remove the control box cover. On the inside of the control box there is a w

1-6General Information Section 1Adjusting the Coin Mechanism for Canadian CoinsImportant Canadian quarters are magnetic. Therefore the magnet insi

2-1 Section 2 InstallationPre-Installation Checks For Q Series Dispensers NOTE: Dispensers must be installed on a solid, level floor or surface. Fro

2-2 Installation Section 2Pre-Installation Checks 1. Location: Floor drain available - A floor drain for the dispenser should be available. We

2-3 Section 2 InstallationInstallation Procedures WARNING Do not attempt to move a dispenser without first removing the ice machine. The combinat

2-4 Installation Section 2Post-Installation Checks1. Dispenser and ice machine are level? 2. Drains are vented? 3. Dispenser does not sit in dir

3-1 Section 3 InstallationInstallation Check List For Q Series Dispensers Front View Side View NOTE: Dispensers must be installed on a solid, level

Installation Section 3With Top-Mounted Ice Machines Installation Check List For Q Series Dispensers 1. Location: Floor drain available - A floor

Section 3 InstallationWith Top-Mounted Ice Machines Installation Procedures WARNING Do not attempt to move a dispenser without first removing th

Safety Notices Installation and start-up of this equipment should be done by a qualified service technician. When using or servicing a Q Model Dispens

Installation Section 3Installation Procedures (continued) 18. Clean and sanitize all equipment. Follow cleaning and sanitizing instructions in se

4-1 Section 4 MaintenanceDisassembling the Dispenser Parts For Cleaning WARNING Electric Shock Hazard Unplug unit before servicing or cleaning.

4-2 Maintenance Section 4Disassembling the Dispenser Parts For Cleaning (continued) 7 Lift the front panel off the catch hooks and se

Section 4 Maintenance Removing the Drain Pan (continued) 4 Remove the inner drain pan. Clean the inner drain pan with sanitizing solution. (See

4-4 Maintenance Section 4Disassembling the Rocking Chute/Door (continued) 3 Remove door lock. 4 Loosen the two thumbscrews of the metal support

4-5 Section 4 MaintenanceDisassembling the Rocking Chute/Door (continued) 8 Remove the two thumb screws from the plastic paddle wheel guard retai

Maintenance Section 4Re-Installing the Paddle Wheel Guard 1 When re-assembling the rocking chute/door, the paddle wheel guard is placed in the sl

Section 4 MaintenanceDisassembling the Dispenser Parts For Bin Cleaning WARNING Unplug unit before servicing or cleaning. Ice dispenser bin con

4-8 Maintenance Section 4Disassembling the Dispenser Parts For Bin Cleaning (continued) 5 Move the agitator to one side and slide the agitator f

4-9 Section 4 MaintenanceRemoval of the Gearmotor WARNING Unplug unit before servicing or cleaning. Electric Shock Hazard. 1 Remove the front p

4-10 Maintenance Section 4Monthly Sanitizing Procedure 1. Remove the front panel, paddle wheel, ice chute and door assembly as shown on pages

Section 5 Component Parts – Removal & ReplacementGearmotor Shaft Seal Replacement WARNING Unplug unit before servicing or cleaning. Electri

5-2 Component Parts – Removal & Replacement Section 5Gearmotor Shaft Seal Replacement (continued) 5 Locate the shaft seal on the underside of

Section 5 Component Parts – Removal & ReplacementGearmotor Shaft Seal Replacement (continued) 8 Press the bin insulator plate back into place

Section 6 Before Calling ServiceChecklist WARNING Unplug unit before servicing or cleaning. Ice dispenser bin contains parts that can move at a

Litho in USA MANITOWOC ICE, INC. 2110 South 26th Street P.O. Box 1720 Manitowoc, WI 54221-1720 Phone: (920) 682-0161 Service Fax: (920) 683-758

i Table of ContentsTable of Contents Section 1 - General Information Foreword...

ii Table of Contents Table of Contents (continued) Section 5 – Component Parts-Removal and Replacement Gearmotor Shaft Seal Replacement ...

Section 1 General InformationGeneral Information This manual is a reference guide for the owner/operator, service agent and installer of this equi

General Information Section 1 WARRANTY INFORMATIONThe packet containing this manual also includes warranty information. Warranty coverage begins th

1-3 Section 1 General InformationEquipment Overview Rocking chute The operation of the Q Series ice dispenser can be divided into three main opera