Manitowoc Q130 Especificaciones descargar pdf (Pagina 186)

186 Part Number 80-01111-9 7/10

NOTE: Manifold gauges must be removed properly to

ensure that no refrigerant contamination or loss

occurs.

8. Make sure that all of the vapor in the charging

hoses is drawn into the ice machine before

disconnecting the charging hoses.

A. Run the ice machine in freeze cycle.

B. Close the high side service valve at the ice

machine.

C. Open the low side service valve at the ice

machine (when supplied) or disconnect the

low loss fitting from the access valve.

D. Open the high and low side valves on the

manifold gauge set. Any refrigerant in the

lines will be pulled into the low side of the

system.

E. Allow the pressures to equalize while the ice

machine is in the freeze cycle.

F. Close the low side service valve at the ice

machine.

9. Remove the hoses from the ice machine and

install the caps.

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 235 236

Sin comentarios

Manitowoc Q130 Especificaciones Pagina 186