Manitowoc CVD1375 Especificaciones descargar pdf (Pagina 37)

–27–

pressures to equalize. Place the ICE/OFF/CLEAN

toggle switch in the OFF position. Connect power to

the CVD

Condensing Unit and allow system to pump

down.

Step 8. To prevent condensation, the entire suction

line including the shut-off valve must be insulated. All

insulation must be airtight and sealed at both ends.

The following insulation requirements prevent

condensation at 90°F (32.2°C) ambient 90% Relative

Humidity. If higher humidity is expected, increase

insulation thickness.

The entire suction line set, including the suction

service valve located on the back of the ice machine,

requires a minimum of 3/4 in. (12.7 mm) wall thickness

insulation.

The entire liquid line set requires a minimum of 

1/4 in. (6.4 mm) wall thickness insulation.

Important

To prevent condensation, the entire suction line

including the shut-off valve must be insulated. All

insulation must be airtight and sealed at both ends.

This requires a minimum of 3/4 in. (12.7 mm)

insulation wall thickness with conditions at or below

90% humidity and 90° ambient. When higher

humidity will be experienced, insulation wall

thickness will need to be increased.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 203 204

Sin comentarios

Manitowoc CVD1375 Especificaciones Pagina 37