Manitowoc MII 302 Especificaciones descargar pdf (Pagina 105)

Part Number STH038 5/12 103

Water System Checklist

A water-related problem often causes the same

symptoms as a refrigeration system component

malfunction.

Water system problems must be identified and

eliminated prior to replacing refrigeration components.

Water area (evaporator) is dirty

• Clean as needed

Water inlet pressure not between 1-5 Bar, 138-552

kPa.

• Install water regulator or increase water pressure

Incoming water temperature is not between 2°C &

32°C

• If too hot, check the hot water line check valves in

other store equipment

Water filtration is plugged (if used)

• Install a new water filter

Water dump valve leaking during the Freeze cycle

• Clean/replace dump valve as needed

Vent tube is not installed on water outlet drain

• See Installation Instructions

Hoses, fittings, etc., are leaking water

• Repair/replace as needed

Water fill valve is stuck open or closed

• Clean/replace as needed

Water is leaking out of the sump trough area

• Stop the water loss

Uneven water flow across the evaporator

• Clean the ice machine

Plastic extrusions and gaskets are not secured to

the evaporator

• Remount/replace as needed

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 181 182

Sin comentarios

Manitowoc MII 302 Especificaciones Pagina 105