Manitowoc MII 150 Guía para resolver problemas descargar pdf (Pagina 28)

Installation and Service Manual

Agitator arm and paddlewheel pin:

8. Rotate the agitator arm so the paddle wheel pin

handle is pointing up, toward the ceiling.

9. Prepare agitator pin for removal by removing the

stainless steel split ring.

10. Then remove the paddle wheel pin from the hole in

the agitator.

11. Push the agitator bar toward the back of the unit

until the agitator is free of the paddle wheel hub.

Paddlewheel, bin liner and paddle wheel area:

12. Move the front of the agitator to one side and slide

the agitator forward until the rear of the agitator

shaft is clear of the bushing.

13. Remove the agitator from the bin area.

14. Slide the paddle wheel from its shaft.

15. Loosen the four knurled fasteners that hold the bin

liner in place.

16. Remove the bin liner.

17. Remove the paddle wheel area from the bin.

18. Discard the remaining ice in the bin.

USER MAINTENANCE

HOW TO DISASSEMBLE FOR CLEANING OR MAINTENANCE

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

Sin comentarios

Manitowoc MII 150 Guía para resolver problemas Pagina 28