Manitowoc RF1200 Especificaciones descargar pdf (Pagina 35)

Part Number 000007661 7/11 35

Operation

Ice Making Sequence of Operation

NOTE: Flake ice machines use an auger to remove

ice from the evaporator. Occasional noises (creaks,

groans, squeaks, or pops) are a normal part of the ice

making process.

RF0244/RF0266/RF0385/RF0388/RF0399

Self-Contained Air-Cooled

When the toggle switch is placed in the “ON” position

the following controls must be in the closed position

before the ice machine will start:

A. Bin Thermostat

B. Low Evaporator Temperature Thermostat

C. Low Water Level Switch

Placing the toggle switch in the ON position starts the

gear motor and refrigeration system. The float valve

controls the water inlet valve and water level. The

freeze cycle ends when ice contacts the bin

thermostat. The ice machine will restart when ice no

longer contacts the bin thermostat.

RF0300

Self-Contained Air-Cooled

When the toggle switch is placed in the “ON” position

the following controls must be in the closed position

before the ice machine will start:

A. Bin Thermostat

B. Low Evaporator Temperature Thermostat

C. Ice Chute Safety Switch

D. Low Water Level Switch

Placing the toggle switch in the ON position starts the

gear motor and a 10 minute compressor time delay.

The compressor starts and the float valve controls the

water inlet valve and water level. The freeze cycle

ends when ice contacts the bin thermostat. The ice

machine remains off until ice no longer contacts the

bin thermostat.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 171 172

Sin comentarios

Manitowoc RF1200 Especificaciones Pagina 35