Manitowoc CMS050A004 Especificaciones descargar pdf (Pagina 82)

BRAZING PROCEDURES FOR DANFOSS

SOLENOID VALVES

• Danfoss stainless steel solenoid valves require a

slightly different brazing technique than brass-

bodied valves.

Copper clad stainless steel does not require as

much flame contact as copper tubing.

Apply heat to the copper tubing first then the

solenoid socket.

• 15% silver solder is recommended although silver

bearing solder in the 5% to 55% range can be

used.

1. Remove coil and verify direction of flow.

2. Fit valve in place and align stem @ 12:00.

3. Do not disassemble valve.

90°

SV3070

SV3069

DIRECTION OF

FLOW ARROW

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 88

Sin comentarios

Manitowoc CMS050A004 Especificaciones Pagina 82